Mr Peterson rubber is high quality rubber insulation materials, won the FM certification in the United States, its use nitrile rubber, PVC and other import and special raw materials, through special process of the flexible closed-cell foam thermal insulation material, not CFCS, do not contain formaldehyde, enduring stable heat conduction performance, wet resistance factor and higher fire resistance.

Low thermal conductivity: thermal conductivity is an important indicator to measure the heat insulation effect of thermal insulation materials, the lower the thermal conductivity, the better the heat insulation performance. When the average temperature is 0℃, the thermal conductivity of this material is 0.034W/M.K, and its surface heat release coefficient is high, so under the same external conditions, the use of relatively thin thickness of this product, can achieve the same thermal insulation effect of traditional insulation materials.

Low density: rubber and plastic national standard density ≤95kg/m3 (no lower limit, can be understood as the national standard to support low density products), Yutsen rubber and plastic density: ≤40-50kg/m

Good flame retardant performance: according to the requirements of "Code for Fire Protection design of Buildings" and "Code for Fire Protection Design of high-rise Civil Buildings", the insulation materials used for pipes and equipment shall be non-combustible or refractory. The material contains a large number of flame retardant smoke reduction raw materials, the smoke concentration produced during combustion is very low, and in case of fire will not melt, will not drop the fire ball, the material burning performance is not lower than the C level standard, to ensure safety and reliability. According to GB8624-2006 "Combustion performance Classification of Building Materials and Products", the product index of Uetersen is far superior to the international standard that the combustion performance of products used in the field of building products should not be lower than GRADE C, ensuring safety and reliability.

Good flexibility: Uetersen rubber and plastic material has good winding and toughness, easy to deal with bending and irregular pipelines in construction, and can save labor and materials; Because of its high elasticity, it can minimize the vibration and resonance of chilled water and hot water pipes in use.

High moisture resistance factor: Uetersen rubber and plastic materials have high moisture resistance factor (μ≥10000), so as to ensure that the material has excellent moisture permeability resistance, stable thermal conductivity in the use of the process, prolong the service life of the material, reduce the operating cost of the system.

Environmental health: Mr Peterson rubber do not contain CFCS, chlorofluorocarbons (CFC) and other harmful substances, do not contain formaldehyde, do not contain heavy metal and silicon, no fiber dust, ammonia and sulphur content of particulate matter, volatile gas and organic matter to release a quantity, greatly satisfy the semiconductor clean room, clean room, and other areas of the application of ultra high requirements, but also with the eu ROHS, REACH certification. They can prevent mold growth, and acid and alkali resistance, superior performance. These properties make Uetersen

 an ideal insulation material for protecting pipes from corrosion caused by atmospheric media or industrial environments.

Uetersen rubber and plastic is widely used in high standard requirements of central air conditioning, split air conditioning, construction, medicine, chemical, electrical and other kinds of pipe and equipment insulation, is the best choice for the pursuit of excellence of customers.